How to Install GOtv Gotenna With Sample Pictures.
Are you searching for the basic guidelines on How to Install GOtv Gotenna? Do you want to know how Gotenna is activated? don’t worry, you on the right portal. schoolinfo.com.ng team has gone extra miles to research and compile the ultimate guidelines for Gotenna Installation with sample pictures.
See also: How to Install GOtv Decoder with Sample Pictures
Assemble Your Gotenna
This is what the GOtenna looks like straight out of the box.
Pull the cable through the middle of the antenna grid.
Screw the cable onto the yellow plastic box of the antenna.
When secured, slide over the waterproof sleeve.
Clip the green plastic box and the red plastic box on the antenna into the green plastic clip and the red plastic clip on the antenna grid, until they click. (Green connects to green and red connects with red.)
Place the U bracket through the middle of the antenna.
Place the first pole bracket over the U bracket with the flat side against the GOtenna grid.
Place the outward facing pole bracket attached to the GOtenna grid against an upright pole. Make sure that the down arrow on the yellow box is pointing down and then fasten the second pole bracket around the pole using the wing nuts provided.
Find a clear site that has no obstructions between the GOtenna and the signal transmitter. Point the GOtenna towards the transmitter. Slowly move your GOtenna to the left or the right until the strongest signal is found. You will be able to see this on the signal lever bar displayed on your TV. Then fix your GOtenna in its position.
